Im testing it now:
1050ti 4gb: 18.5S/s
1050 2gb: 16.5S/s
Total: 35Sol/s it means +5Sol compaired to EWBF!
Total: 35Sol/s it means +5Sol compaired to EWBF!
Hi FollowWings,
because the miner uses almost all GPU resources, everything running in parallel will certainly have an effect in performance.
However, the best is to try and see how it goes.
Cheers
Thanks for reporting!
Hi everyone,
thank you all for your encouragement and feedback.
There is a new miniZ version v1.0j available for download @ https://miniz.ch
Hive OS support @ https://miniz.ch/2018/12/13/hive-os-support/
Sol/s:
Like the previous version, we added support for RTX 20xx GPUs. If you happen to try miniZ on these GPUs, give us feedback so that we can keep improving the miner.
Use Cuda 10.0 versions with the RTX GPUs. Other GPUs should perform better with Cuda 8.0 versions.
For more information, download, and support check the website: https://miniz.ch/
Download miniZ miner here: https://miniz.ch/download/
***** It is advisable to always download from miniZ website, and always verify the checksum. *****
Happy BTCZ mining!
Hi everyone,
thanks for staying with us, for your support and feedback.
There is a new miniZ version v1.1k available for download @ https://miniz.ch
Hive OS support @ https://miniz.ch/2019/02/22/hive-os-support-2/
Sol/s:
Use Cuda 10.0 versions with the RTX GPUs. For the other GPUs you should test and see which performs best.
For more information, download, and support check the website: https://miniz.ch/
Download miniZ miner here: https://miniz.ch/download/
***** It is advisable to always download from miniZ website, and always verify the checksum. *****
Happy BTCZ mining!
Hi everyone,
thank your to BitcoinZ community for your support and feedback.
There is a new miniZ version v1.2l available for download @ https://miniz.ch
Hive OS support @ https://miniz.ch/2019/03/17/hive-os-support-3//
Performance:
Use Cuda 10.0 versions with the RTX GPUs. For the other GPUs you should test and see which performs best.
For additional information check our Usage and/or FAQ pages.
Download miniZ miner here: https://miniz.ch/download/
***** It is advisable to always download from miniZ website, and always verify the checksum. *****
Happy BTCZ mining!
Hello, what parameter did you put to get ~ 65-73 Gb / s with a GTX 1080 8GB?
I am at 66 S / s maximum.
Best regards
Hi gilardh,
Sure. We share the settings we tested, and that seemed stable, here https://miniz.ch/1445-2/
The version v1.2m should bring an improvement for this gpu. Will be out soon, within a weekâŠmaybe less.
Cheers
Hi everyone,
thank you to BitcoinZ community for your support and feedback.
miniZ is growing better in each version.
There is a new miniZ miner version v1.2m!
Download @ https://miniz.ch
--show-pers
to show personalization string.--smart-pers
to use personalization string âautoâ if available, otherwise use specified pers.--show-solratio
to show number of solutions per iteration.--oc1
/--oc2
for boost in performance when applying OCs to GPUs.**miniZ.exe --nocolor --help
to exclude colors (Win7).Performance:
Use Cuda 10.0 versions with the RTX GPUs. For the other GPUs you should test and see which performs best.
For additional information check our Usage and/or FAQ pages.
Download miniZ miner here: https://miniz.ch/download/
***** It is advisable to always download from miniZ website, and always verify the checksum. *****
Happy BTCZ mining!
Very nice work ! 15-20% hashrate improvement
Hi everyone,
it has been a while since our last post here, but we did not forget BTCZ
We have been introducing other Equihash variants but also adding new features to miniZ.
Also, we started revising miniZ and looking for possible improvements in performance.
There is a new miniZ miner version v1.5q2!
v1.5q2 introduces some fixes to v1.5q, it is recommended the update to the latest version.
Download @ https://miniz.ch
v1.5q2 summary:
From v1.5q:
--csv
option for log stats in csv format.-ci
output.Check performances here.
For additional information check our Usage and/or FAQ pages.
Download miniZ miner here: https://miniz.ch/download/
***** It is advisable to always download from miniZ website, and always verify the checksum. *****
Happy BTCZ mining!
Hi everyone,
Thank you for your patience! A new version miniZ v1.5t is out!
miniZ has speed improvements in the new version. All GPUs and algos have improvements, including for 144,5! !
Also, in brief:
Download miniZ v1.5t here.
Few notes:
For additional information check our Usage or FAQ pages.
Let us know how it goes!
Happy BTCZ mining!
Hi everyone,
Thank you for your support! A new version miniZ v1.5u is out!
miniZ has speed improvements in the new version: major improvements for 144,5 !
Changelog:
Download miniZ v1.5u here .
Few notes:
When adjusting your GPUs settings do not forget to check if your GPU supports oc1/oc2. If so it may boost your performance a little. --oc1/oc2 changed for some GPUs and algos in the new version.
You can also use an option for automatic tunning of the best kernel for your GPU and OC settings --ocX - available in all algorithms. For updated information read the specific topic on FAQ page.
In this version we have stopped Cuda 8 support. On Download page you can find Cuda 10 version (Linux and Windows).
For additional information check our Usage or FAQ pages.
Let us know how it goes!
Happy BTCZ mining!
Stopped contributing, no new version?
Hi BTCZ miners,
Thank you all for your support and preference! Yes we are still developing and improving miniZ!
A new miniZ v1.8y2 version is out!
This version includes many fixes and improvements! These are not specific to BTCZ mining, however in general all algorithms benefit from them.
Please find miniZ v1.8y2 version @ Download page.
Changelog:
Remember to try --oc1/âoc2/âocX options for optimum performance.
For additional information check our Usage or FAQ pages.
For more information about miniZ and other algos (ethash, progpowâŠ) check our website.
Follow us
On Twitter
Let us know if youâre facing any issues with miniZ!
Your feedback/suggestions, are always quite precious!
Happy BTCZ mining!
Hi BTCZ miners,
A new miniZ v1.8y3 version is out!
This version includes a few improvements! They are not specific to 144,5 algorithm, however in general all algorithms benefit from them. For more information check:
Please find miniZ v1.8y3 version @ Download page.
In summary:
Check our website here.
For additional information check our Usage or FAQ pages.
Follow us
On Twitter
Let us know how it goes! Your feedback and suggestions are valuable to us!
Happy BTCZ mining!
Hi everyone,
A new miniZ version v1.8z2 is out with added support for AMD mining â 144,5 (also ethash/etchash, and 125,4)!
Please find miniZ version v1.8z2 @ Download page.
For more information check:
In summary:
Check our website here .
For additional information check our Usage or FAQ pages.
Follow us
On Twitter
Let us know how it goes! Your feedback is precious!
Happy BTCZ mining!
Hi everyone,
A new miniZ version v1.9z3 is out with new options for core and memory clocks offset.
Also, fixed issues with AMDs stats output. Remember that you can also use miniZ to mine BTCZ with AMD GPUs
Please find miniZ version v1.9z3 @ Download page.
For more information check:
Changelog:
Check our website here.
For additional information check our Usage or FAQ pages.
Follow us on Twitter
Happy BTCZ mining!
Hi, I am running v1.9z3 on HiveOS (latest stable 5.10.0).
The miner is not recognising several command: --mt-auto, --gpuclock, --memcloc⊠on Windows they work fine and using them I manage to get much better efifciency on Flux on my 1660TI (0.37 VS 0.43). Would be possible to have them working also on Hive? Thanks